Portable mobile fuelcube tank sale for USA

1. Inspection before use
Before using the mobile fuel tank, a comprehensive inspection is required. First check the appearance. The tank should have no obvious dents or cracks to ensure that the structure is intact. Then check the valves of the fuel inlet and the outlet to ensure that they are flexible and well sealed to avoid fuel leakage. Check the level gauge to ensure that the display is normal and can accurately reflect the remaining fuel in the tank. At the same time, confirm that the electrostatic grounding device is reliably connected, the safety valve is not blocked or damaged, and all components are in normal working condition. 
2. Fuel filling
Move the mobile fuel tank to a safe filling area away from fire and crowds. Open the fuel filler cap, remove the internal filter and clean it (if there are impurities) and put it back. Connect the fuel gun to the fuel inlet tightly, open the fuel gun valve slowly, control the fuel flow rate, and avoid filling too quickly to cause fuel overflow. During the filling process, pay close attention to the level gauge. When the liquid level is close to the rated capacity of the tank, reduce the refueling speed until it is full. After the filling is completed, close the fuel gun valve, remove the fuel gun, cover the fuel inlet cap, and ensure that it is tightly sealed.​
3. Transportation and movement​
If you need to transport a mobile fuel tank, first secure it firmly on the transport vehicle, and use ropes, chains and other tools to ensure that the tank will not shake or shift during transportation. Before starting the transport vehicle, check the fixing status and whether the valves are closed again. During transportation, maintain smooth driving, avoid sudden braking and sharp turns, and prevent the fuel from shaking violently in the tank and causing danger. After arriving at the destination, carefully remove the fixing device and move the tank to the designated location. ​
4. Fuel output​
Connect the oil outlet pipeline to the oil inlet of the equipment to be refueled, and ensure that the connection is tight and there is no leakage. Slowly open the oil outlet valve and control the fuel output flow according to the equipment requirements. During refueling, always observe the equipment refueling status and the changes in the tank liquid level. After refueling, close the oil outlet valve first, and then remove the oil outlet pipeline connection.
https://www.sumachine.com/