Mobile transcube fuelcube tank sale for USA

1. Installation location selection
The location where the mobile fuel tank is installed should be away from heat and fire sources, such as engine exhaust ports, boiler rooms and other areas, to prevent fuel volatilization or even fire and explosion caused by high temperature. At the same time, a well-ventilated place should be selected to facilitate the timely dissipation of fuel vapor and reduce the risk of accumulation. In addition, considering the convenience of daily use, the installation location should be convenient for refueling and maintenance operations, such as avoiding installation in narrow and hard-to-reach corners. If installed on a vehicle, it should be selected at a lower center of gravity of the vehicle to help maintain driving stability and reduce the impact of the tank shaking on the vehicle's handling during sharp turns or sudden braking. ​
2. Confirmation of fixing method
Solid fixation is the key to ensuring the safety of the mobile fuel tank. According to the shape of the fuel tank and the installation location, select an appropriate fixing device, such as U-bolts, binding straps, etc. When fixing, be sure to ensure that the fuel tank fits tightly with the fixing point without any loose gap. When installing with multiple fixing points, the force on each fixing point should be uniform to avoid deformation of the fuel tank or damage to the fixing parts due to excessive local force. During vehicle driving or equipment movement, continuous bumps may loosen the fixings, so after installation, it is necessary to regularly check the tightness of the fixings and tighten the loose parts in time. ​
3. Pipeline connection operation​
When connecting the refueling and outlet pipelines, ensure that the pipeline material is compatible with the fuel to prevent chemical reactions from corroding the pipeline. The pipeline interface should be cleaned to remove impurities and oil stains to ensure good sealing. When using sealing gaskets or sealants, apply them evenly. After installation, a sealing test is required. You can fill the fuel tank with a certain pressure gas and observe whether there are bubbles coming out of the pipeline connection. If there is a leak, check and repair it in time. In addition, plan the pipeline direction reasonably to avoid excessive bending and winding of the pipeline to ensure smooth flow of fuel and reduce resistance.
https://www.sumachine.com/